IDFX専門トレーリング & IDFXテストサンプル問題

当社は、教材を担当しています。 CertShikenが顧客に販売したすべての製品は、CIDQ思いやりのあるアフターサービスをお楽しみいただけます。インストール、操作などの学習資料に問題がある場合は、オンラインワーカーがメールをInterior Design Fundamentals Exam受信した後、すぐに返信します。私たちはトラブルを恐れていません。 IDFXご質問やご提案をお待ちしております。問題の解決にお役立てください。

CIDQ IDFX 認定試験の出題範囲：

トピック	出題範囲
トピック 1	施工図、工程表、仕様書：この試験セクションでは、インテリアデザイナーのスキルを測り、技術文書の作成と解釈を網羅します。受験者は、製図基準、寸法記入規則、および法令で定められた注釈を熟知しているだけでなく、設計意図を正確に伝える平面図、断面図、立面図、工程表、木工製品の詳細図を作成する能力も示さなければなりません。
トピック 2	家具、備品、設備、照明の技術仕様：この試験セクションでは、設計コンサルタントとしてのスキルを評価し、家具、備品、照明システムの仕様策定方法を検証します。受験者は、生命安全要件、持続可能性指標、材料性能基準、そして機能的および環境的目標を満たすために、発光効率、演色性、エネルギー負荷などの要素を考慮した適切な器具の選定方法を理解していることを証明します。
トピック 3	デザインコミュニケーションテクニック：このセクションでは、インテリアデザイナーのスキルを評価し、調査結果とコンセプトを明確なビジュアルフォーマットに落とし込む能力に焦点を当てます。受験者は、アイデアを伝えるためのチャート、インフォグラフィック、概念図の作成方法、そして空間内のレイアウトと機能的な関係性を示すための隣接調査やゾーニングプランなどの計画図の作成方法を示します。
トピック 4	プログラミングと敷地分析：この試験セクションでは、インテリアデザイナーのスキルを評価し、プロジェクトの状況を理解するための分析手法の効果的な活用について学びます。受験者は、スプレッドシート、図表、写真分析などのツールに加え、観察や先行研究といった調査手法を用いて、立地、方位、ゾーニング制限、既存の状況といった敷地要因を評価する方法を示す必要があります。
トピック 5	内装建材と仕上げ：このセクションでは、インテリアデザイナーのスキルを評価し、表面材の選択と仕様について考察します。受験者は、室内環境におけるテキスタイル、床材、壁・天井処理、吸音製品、標識に関する性能基準、設置方法、および技術的考慮事項を理解していることを示す必要があります。
トピック 6	専門能力開発と倫理：この試験セクションでは、デザインコンサルタントのスキルを評価し、倫理的な実践と継続的な学習の重要性を強調します。受験者は、専門的な行動規範、消費者保護の原則、そして継続的な教育と業界団体との連携に関する戦略に精通していることを証明します。
トピック 7	人間の行動と設計環境の関係：この試験セクションでは、デザインコンサルタントとしてのスキルを測り、人々が空間とどのように関わっているかを解釈する能力が問われます。受験者は、人間工学的側面から社会的・文化的影響に至るまでのヒューマンファクターに関する理解、そしてユニバーサルデザインの原則がアクセシビリティとインクルーシビティをどのように確保しているか、そして照明、音響、温熱環境といった感覚的影響も考慮していることを証明します。

>> IDFX専門トレーリング <<

IDFXテストサンプル問題 & IDFX日本語問題集

CIDQ複雑な知識が簡素化され、学習内容が習得しやすいCertShikenのIDFXテストトレントのセットを提供します。これにより、貴重な時間を制限しながら、CIDQより重要な知識を獲得できます。 Interior Design Fundamentals Examガイドトレントには、時間管理とシミュレーションテスト機能が装備されています。タイムキーパーを設定して、速度を調整し、効率を改善するために注意を払うのに役立ちます。当社の専門家チームは、IDFX認定トレーニングでInterior Design Fundamentals Exam試験を準備するのに20〜30時間しかかからない非常に効率的なトレーニングプロセスを設計しました。

CIDQ Interior Design Fundamentals Exam 認定 IDFX 試験問題 (Q25-Q30):

質問 # 25
Which project phase includes relationship diagrams, block plans, preliminary space plans, and study models?

A. Pre-design
B. Programming
C. Design development
D. Schematic design

正解：D

解説：
The interior design process consists of several phases, each with specific deliverables and activities. The NCIDQ IDFX Reference Manual outlines these phases, including pre-design, programming, schematic design, and design development, and describes the tasks associated with each.
* A. Pre-design: Pre-design involves initial project setup activities, such as defining the project scope, budget, and timeline, and conducting feasibility studies. It does not typically include design deliverables like diagrams or plans.
* B. Programming: Programming is the phase where the designer gathers and analyzes the client's needs and requirements. While it may include conceptual tools like bubble diagrams to explore relationships, it does not typically involve block plans, preliminary space plans, or study models, which are more developed design deliverables.
* C. Schematic design: Schematic design is the phase where the designer begins to translate the programming data into conceptual design solutions. This includes creating relationship diagrams (e.g., refined bubble diagrams), block plans (to fit spaces into the building envelope), preliminary space plans (initial layouts), and study models (to explore spatial relationships in three dimensions). These deliverables are characteristic of schematic design, as they help the designer and client visualize the design concept before moving into detailed development.
* D. Design development: Design development involves refining the schematic design, creating detailed drawings, and selecting materials and finishes. While it builds on the work from schematic design, it focuses on detailed documentation rather than conceptual tools like relationship diagrams or study models.
The NCIDQ IDFX Reference Manual specifies that relationship diagrams, block plans, preliminary space plans, and study models are part of the schematic design phase, as they are used to develop and communicate the initial design concept.
Verified Answer from Official Source:The correct answer is C, as verified by the NCIDQ IDFX Reference Manual.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 3: Programming and Space Planning): "Schematic design includes the creation of relationship diagrams, block plans, preliminary space plans, and study models to develop and communicate the initial design concept." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that schematic design is the phase where conceptual design tools like relationship diagrams, block plans, preliminary space plans, and study models are used to explore and refine the design concept. This phase bridges the gap between programming (data collection) and design development (detailed documentation), making it the appropriate phase for these deliverables.
Objectives:
* Understand the phases of the interior design process and their deliverables.
* Identify the role of schematic design in developing conceptual design solutions.

質問 # 26
On a demolition plan, elements to be removed are shown using a

A. Dotted line
B. Short, dashed line
C. Long and short dashed line
D. Solid, heavy line

正解：A

解説：
A demolition plan is a type of construction drawing that indicates which elements of an existing space are to be removed or altered during a renovation or construction project. The NCIDQ IDFX Reference Manual and standard architectural drafting conventions (e.g., as outlined in the American Institute of Architects [AIA] guidelines) specify how different line types are used to convey information in such drawings.
* A. Dotted line: In demolition plans, elements to be removed are typically shown with a dotted line (also called a broken or phantom line). This convention visually distinguishes elements that will be demolished from those that will remain, which are usually shown with solid lines. The dotted line indicates that the element is temporary in the context of the new design.
* B. Solid, heavy line: Solid, heavy lines are typically used to represent existing elements that will remain or new construction elements in a drawing. They are not used for demolition.
* C. Short, dashed line: Short, dashed lines are often used to indicate hidden edges (e.g., edges of objects that are not directly visible) or centerlines, not elements to be removed.
* D. Long and short dashed line: This line type is commonly used for property lines, section lines, or to indicate elements above (e.g., in a reflected ceiling plan), not for demolition purposes.
The NCIDQ IDFX Reference Manual aligns with industry standards, such as those from the AIA, which specify that dotted lines are the standard for indicating demolition on construction drawings. This ensures clarity for contractors and other stakeholders during the demolition phase.
Verified Answer from Official Source:The correct answer is A, as verified by the NCIDQ IDFX Reference Manual.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 5: Construction Drawings and Specifications): "On a demolition plan, elements to be removed are indicated using a dotted line to distinguish them from existing elements that will remain, which are shown with solid lines." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that dotted lines are used in demolition plans to clearly indicate which elements are to be removed, ensuring that contractors can easily differentiate between existing conditions and demolition work. This convention is part of standard drafting practices to maintain clarity and consistency in construction documents.
Objectives:
* Understand the use of line types in construction drawings.
* Identify the appropriate line type for indicating demolition on a plan.

質問 # 27
When space planning an open office with modular furniture, what is the corridor width needed for two people to pass?

A. 42"-54" [1067-1372 mm]
B. 32"-35" [813-889 mm]
C. 36"-38" [914-965 mm]
D. 60"-62" [1524-1575 mm]

正解：D

解説：
In an open office environment with modular furniture, corridor widths must accommodate circulation for multiple people, especially in high-traffic areas. The NCIDQ IDFX Reference Manual and ergonomic standards (such as those from the Business and Institutional Furniture Manufacturers Association, BIFMA, and ANSI/HFES 100-2007) provide guidelines for circulation spaces in office settings.
* A. 32"-35" [813-889 mm]: This range is too narrow for two people to pass comfortably. The ADA requires a minimum clear width of 32 inches (815 mm) for a single wheelchair to pass, and 36 inches (914 mm) is often the minimum for a single person in a corridor. This does not account for two people passing each other.
* B. 36"-38" [914-965 mm]: This range is the minimum for a single person to pass comfortably in a corridor, as per IBC and ADA standards, but it is still insufficient for two people to pass without turning sideways or stopping.
* C. 42"-54" [1067-1372 mm]: This range is closer to what might be needed for two people to pass, but it is still on the lower end for an open office with modular furniture, where additional space may be required due to furniture protrusions or frequent traffic.
* D. 60"-62" [1524-1575 mm]: According to ergonomic standards and NCIDQ guidelines, a corridor width of 60 inches (1524 mm) or more is recommended for two people to pass comfortably without interruption, especially in an open office setting where modular furniture may create additional obstacles. This width allows two people (each requiring approximately 30 inches of shoulder width) to pass without turning sideways, even with minor furniture protrusions.
The NCIDQ IDFX Reference Manual references ergonomic standards for circulation, noting that in office settings, wider corridors are necessary to accommodate multiple users, especially in areas with modular furniture that may encroach on circulation paths.
Verified Answer from Official Source:The correct answer is D, as verified by the NCIDQ IDFX Reference Manual and ergonomic standards referenced in the NCIDQ curriculum.
Exact Extract:
From the NCIDQ IDFX Reference Manual (Chapter 4: Space Planning): "In open office environments, corridors should be designed to allow for two people to pass comfortably, typically requiring a minimum width of 60 inches [1524 mm] to accommodate circulation, especially in areas with modular furniture." Explanation from Official Source:
The NCIDQ IDFX Reference Manual explains that circulation spaces in open offices must account for the dynamic movement of multiple people. A width of 60 inches ensures that two people can pass without disruption, aligning with ergonomic principles and practical design considerations for office environments.
Objectives:
* Understand circulation requirements in open office space planning.
* Apply ergonomic standards to determine appropriate corridor widths.

質問 # 28
A design firm submits a bid for a healthcare project noting that they specialize in healthcare design, when they have only completed education projects that contain one small nurse room per project. This is an example of violating the

A. RFP guidelines
B. Code of ethics
C. Permitting requirements
D. Health and safety guidelines

正解：B

解説：
Ethical behavior in interior design is governed by professional codes of conduct, such as the NCIDQ Code of Ethics and codes from organizations like the American Society of Interior Designers (ASID) and the International Interior Design Association (IIDA). These codes emphasize honesty, integrity, and transparency in professional practice.
* A. Code of ethics: The NCIDQ Code of Ethics requires designers to be truthful in their professional representations. Claiming to specialize in healthcare design when the firm hasonly completed education projects with minimal healthcare components (e.g., a small nurse room) is a misrepresentation of their expertise. This violates the code of ethics, specifically the principle of honesty, as it could mislead the client about the firm's qualifications and experience, potentially compromising the project's outcome.
* B. RFP guidelines: A Request for Proposal (RFP) outlines the requirements for submitting a bid, such as project scope and submission format. While misrepresenting expertise might not align with the spirit of an RFP, it is not a direct violation of RFP guidelines unless the RFP explicitly requires proof of healthcare experience, which is not indicated in the question.
* C. Permitting requirements: Permitting requirements involve complying with local building codes and regulations to obtain permits for construction. Misrepresenting expertise does not directly violate permitting requirements, as this issue pertains to professional conduct, not regulatory compliance.
* D. Health and safety guidelines: Health and safety guidelines relate to designing spaces that protect occupants (e.g., following codes for egress, fire safety). While a lack of healthcare expertise could potentially impact health and safety in a project, the act of misrepresenting expertise is not a direct violation of these guidelines.
The NCIDQ Code of Ethics explicitly prohibits misrepresentation of qualifications, making this a clear violation of ethical standards.
Verified Answer from Official Source:The correct answer is A, as verified by the NCIDQ Code of Ethics.
Exact Extract:
From the NCIDQ Code of Ethics (Section 1: Responsibility to the Profession): "Interior designers shall not misrepresent their qualifications, experience, or expertise, ensuring honesty in all professional representations to clients and stakeholders." Explanation from Official Source:
The NCIDQ Code of Ethics states that designers must be truthful about their qualifications and experience.
Claiming to specialize in healthcare design without substantial experience in that area is a misrepresentation, violating the ethical principle of honesty. This could mislead the client and affect the project's success, making it a clear ethical violation.
Objectives:
* Understand ethical standards in interior design practice.
* Identify behaviors that violate the NCIDQ Code of Ethics.

質問 # 29
A designer is selecting furnishings for a weight loss clinic lobby. Which type of chair would the designer MOST likely include in their selections?

A. An exam chair
B. A reclining chair
C. An ergonomic chair
D. A bariatric chair

正解：D

解説：
A weight loss clinic lobby serves clients who may have higher body weights, requiring furniture that can safely and comfortably accommodate them. A bariatric chair is specifically designed for individuals with higher weight capacities (typically 300-500 lbs or more) and wider seat dimensions, ensuring safety, comfort, and inclusivity. Option A (exam chair) is for medical examination rooms, not a lobby. Option B (reclining chair) may be comfortable but is not designedfor higher weight capacities. Option D (ergonomic chair) focuses on posture and comfort for office settings, not specifically for bariatric needs.
Verified Answer from Official Source:
The correct answer is verified using NCIDQ IDFX content on furniture selection for specific user groups.
Exact Extract:TheNCIDQ IDFX Reference Manualstates, "In healthcare settings like a weight loss clinic, bariatric chairs should be included in lobby furnishings to accommodate clients with higher weight capacities safely and comfortably." The NCIDQ IDFX curriculum emphasizes designing for diverse user groups, with bariatric furniture being a key consideration in healthcare settings to ensure inclusivity and safety.
Objectives:
* Select furniture for specific user needs (IDFX Objective: Human Behavior and the Designed Environment).

質問 # 30
......

弊社のCIDQ　IDFX問題集を使用した後、IDFX試験に合格するのはあまりに難しくないことだと知られます。我々CertShiken提供するIDFX問題集を通して、試験に迅速的にパースする技をファンドできます。あなたのご遠慮なく購買するために、弊社は提供する無料のCIDQ　IDFX問題集デーモをダウンロードします。

IDFXテストサンプル問題: https://www.certshiken.com/IDFX-shiken.html

John Hart John Hart

Biography

IDFX専門トレーリング & IDFXテストサンプル問題

CIDQ IDFX 認定試験の出題範囲：

IDFXテストサンプル問題 & IDFX日本語問題集

CIDQ Interior Design Fundamentals Exam 認定 IDFX 試験問題 (Q25-Q30):

Quick Links

Resources